Croydex AD107041YW Guía de instalación descargar pdf (Pagina 2)

5. Screw the wall brackets to the wall. (See Fig.3)

6. Thread one end of the wire through the small hole at the domed end of the wall bracket cover and

through the hole in the collet. Tighten the collet using the hex head key, approximately 20mm

from the end of the wire. (See Fig.4)

7. Thread the wall bracket cover onto one of the wall brackets and rotate clockwise until the screw

threads are covered. (See Fig.5)

8. Repeat the assembly process for the opposite end of the wire, adjusting the position of the collet

to cater for the stretch of the wire if required.

9. Rotate the wall bracket covers until a suitable wire taughtness is achieved, but do not over

tighten. Alternate the rotation of the wall bracket covers to obtain a consistent gap between wall

bracket and cover. (See Fig.5)

10. It may be necessary to adjust the positions of the collets if the wire cannot be adequately

tightened. If adjustment is required, repeat assembly procedures 8 and 9.

11. Clip the curtain hooks onto the Wireline and hang your curtain.

Product Care Advice

To retain the best quality finish, clean product regularly with a soft damp cloth.

Do not use abrasive or chemical cleaners, as these will damage the product.

Please retain this leaflet for future reference.

Croydex Ltd, Central Way, Andover, Hants, SP105AW, UK

Tel: +44 (0) 1264 365881 ~ Fax: +44 (0) 1264 356437

website: www.croydex.com

R&R 033 R01

1 2

Sin comentarios

Croydex AD107041YW Guía de instalación Pagina 2