Croydex QM621441YWB Guía de instalación descargar pdf (Pagina 2)

2. Drill the holes to a depth of 40mm in the marked positions using a 6mm

masonry drill. If the product is to be fitted onto a ceramic tiled wall, a

ceramic drill bit should be used.

3. Insert the wall plugs flush to the surface of the wall. If fitting to a tiled

surface, the wall plugs should be inserted below the surface of the tile to

avoid cracking.

4. Insert the screws provided through the wall fixing bracket and screw into the

wall. Ensuring the wall bracket is level.

5. Using a small flat head screwdriver loosen the grub screw within the

backplate. Place the backplate on the wall bracket and tighten the grub

screw as shown in figure 2.

Fig.1 Fig.2

Additional Information

• Maximum safe working load for the shelf is 5kg. This load must be evenly

distributed across the surface area of the shelf.

• The toilet roll holder has a clear film on the cover to protect it from damage

whilst in transit. Please remove this film before use.

Product Care Advice

• To retain the best quality finish, clean product regularly with a soft damp

cloth.

• Do not use abrasive or chemical cleaners, as these will damage the product.

• Do not place hot objects onto the surface of the glass.

• Do not position glass components in close contact with a heat source.

Croydex Limited, Central Way, Andover, Hants, SP10 5AW, UK

Tel: +44 (0) 1264 365881. Fax: +44 (0) 1264 356437

Website: www.croydex.co.uk

WMA 032 R03 A5

1 2

Sin comentarios

Croydex QM621441YWB Guía de instalación Pagina 2